Carrier Access Axxius 800 用户手册

Axxius 800 - Release 2.2

5-133

CLI Commands

set

set (router) snmp name

Use the set (router) snmp name command to set the value of sysName on the specified
Router card.

Syntax:

set {rtr_card-addr} snmp name {"system-name"}

Example:

set 1 snmp name "AxxiusRouters"

The example will set the value of sysName on the TSR card in slot 1 to
"AxxiusRouters".

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{"system-name"}

The value of sysName, with a maximum of 64 ASCII characters. Name must be enclosed
in quotes.