Buffalo Technology WLI-TX4-AG300N 用户手册

 

If your Wireless Router/Access Point supports AOSS, then AOSS can configure your wireless network 

for you.  To configure your network with AOSS:
•  Power on the Wireless Router/Access Point and the Ethernet Converter.

•  Hold in the AOSS button on the Wireless Router/Access Point for 3 seconds.

•  Hold in the AOSS button on the Ethernet Converter for 3 seconds.
AOSS will take about a minute to configure your wireless network.  When finished, the AOSS LEDs on 

both the Wireless Router/Access Point and the Ethernet Converter will stop blinking and stay lit.  You 

now have a secure connection!
NOTES:  If AOSS is used in a network with existing non-AOSS wireless client devices, then they may 

have to be manually re-configured afterward to reconnect to the Router/Access Point.  
AOSS configures your SSID, encryption type, wireless channel, and encryption key, and 

makes a secure connection between your wireless 

components.  You may still need to run your router's 

configuration utility to connect to the internet.
If AOSS does not finish properly, power cycle both 

the Router/Access Point and the Ethernet Converter 

and rerun AOSS.  AOSS works best when the router 

and the Ethernet Converter are physically close.  You 

can always move them further apart when configuration is complete.