Cabletron Systems HSIM-W6 用户手册
HSIM-W6 User’s Guide
59
6
HSIM-W6 Configuration with
QuickSET
This chapter provides step-by-step instructions for configuring the HSIM-W6 through the use of
QuickSET.
QuickSET.
\
Normally, QuickSET automatically establishes a communication link with the HSIM-W6 being
configured. However, under certain circumstances, QuickSET may not be able to automatically
locate the HSIM-W6. In this case, the window shown in
configured. However, under certain circumstances, QuickSET may not be able to automatically
locate the HSIM-W6. In this case, the window shown in
displays:
Figure 16
IP Address Window
Enter the IP address of the HSIM-W6 in the appropriate field and the password if applicable (the
default password is public). Click on the OK button and QuickSET should now locate the
HSIM-W6 on the network and display the First Introductory window shown in
default password is public). Click on the OK button and QuickSET should now locate the
HSIM-W6 on the network and display the First Introductory window shown in
NOTE
Before configuring the device, you must set up your computer based on the
READ ME
FIRST! documentation included with the product and installed the HSIM-W6 based on
the
the
QuickSTART Guide located in the QuickSET CD case.
The HSIM-W6 must have at least one WPIM installed before you can begin
configuring the device.
configuring the device.