Abocom FE1500 用户手册

This section describes the installation for 
Windows NT under the condition that Windows 
NT is already installed in your computer. If your 
computer is not yet networking installed, refer to 
the Windows documentation for details. Also 
remember to have your original Windows NT 
CD-ROM handy before you begin the installation. 
For Windows NT may ask for it during the 
installation.  
1.  Before you turn on your computer, make 

sure the PCMCIA Fast Ethernet PC Card 
has been properly inserted into the free 
PCMCIA slot of your computer. 

2.  Start Windows NT. 

3. Click  Start Settings Control Panel. 

Double-click on the Network icon. 

4.  When the Network window appears, click on 

the Adapters tab.  Click on the Add button, 
followed by Have Disk.  Put the driver disk 
into drive A. 

5.  When asked to supply the path to the disk, 

type a:\ and click OK. 

6.  Windows NT will ask you to supply the I/O 

Base, Interrupt, and Memory values for the 
card. Good values to start with are 300 (for 
the I/O Base) and 5 (for the IRQ). 

7.  When you're finished, click OK.  Windows 

NT will copy necessary files to your 
computer.