3com 3CR990SVR95 用户手册
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
6
E
THER
L
INK
S
ERVER
10/100 PCI NIC Q
UICK
S
TART
G
UIDE
using installation diskettes. For more information about
installation diskettes, see
installation diskettes, see
the next section.
To make a DOS-bootable diskette:
1 Insert a blank, formatted diskette in drive A.
2 At the DOS prompt, enter:
sys a:
System files are copied to the diskette.
3 Remove the diskette from drive A and attach a label
for future reference.
Repeats steps 1-3 to create a second DOS-bootable
diskette. Label the diskettes EtherDisk 1 and EtherDisk 2.
diskette. Label the diskettes EtherDisk 1 and EtherDisk 2.
Creating Installation Diskettes
To create installation diskettes from the EtherCD:
1 Turn on the power to the PC and start Windows.
2 Insert the EtherCD in the CD-ROM drive.
The EtherCD Welcome screen appears.
3 Click NIC Software.
4 Click NIC Drivers and Diagnostics.
5 Click Installation Utilities.
6 Click Create Installation Diskettes.
The EtherCD Diskette Creation Utility Welcome
screen appears.
screen appears.
7 Click Next.
8 Insert the blank, formatted diskette labeled
EtherDisk 1 in the PC, and then click Next.
Files are copied. EtherDisk 1 contains:
■
NDIS 2/3/4/5 drivers
■
DOS utilities
■
Windows 2000 Utilities to enable disable task
offloads
offloads
■
README.TXT file
9 Remove the disk and insert the disk labeled
EtherDisk 2 when prompted, and then click OK.