Panasonic ET-MD77NT 用户手册
2
ET-MD77DV
DVI-D Board for DLP™ Projector
S P E C F I L E
As of December 2006
Specifications
Power supply:
Provided from the DLP™ projector
Power consumption:
Projector power consumption increases approximately 5 W
Terminals:
DVI-D input:
DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP
EDID1:
EDID1:
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p
1080/25p, 1080/24p, 1080/24sF, 1080/30p
EDID2:
VGA (640 x 480) – U-XGA (1,600 x 1,200),
dot clock: 25 –162 MHz
dot clock: 25 –162 MHz
LAN:
RJ-45 x 1, 10Base-T/100Base-TX for network connection
Dimensions (W x H x D):
204 x 32 x 214 mm (8-1/32˝ x 1-1/4˝ x 8-7/16˝)
Weight:
310 g (10.9 lbs.)
Operating temperature:
0°C – 40°C
Operating humidity:
10% – 80% (no condensation)
NOTE:
Ready for single link only. Ready for the non-interlaced signals only with EDID2.
576p and 720/50p signals can be input only when this unit is used with the PT-DW10000,
PT-D10000, PT-DW7000 or PT-D7700.
576p and 720/50p signals can be input only when this unit is used with the PT-DW10000,
PT-D10000, PT-DW7000 or PT-D7700.
Weights and dimensions shown are approximate.
Specifications subject to change without notice.
DLP and DLP logo are trademarks of Texas Instruments.
This input board is designed for use with the DLP™ projectors. It enables the input of a digital signal (DVI-D) from
a computer. Remote control of the projector is also possible from an external computer connected via LAN.
a computer. Remote control of the projector is also possible from an external computer connected via LAN.
NOTE: Please use the module only on the specified Panasonic DLP™ projector.
Dimensions
DVI-D output connector pin
assignment
assignment
unit: mm
(Dimensions given in inches are approximate.)
204
(8-1/32˝)
214
32
(8-7/16˝)
(1-1/4˝)
Note: This illustration is not drawn to scale.
no.
signal
1
T, M, D, S data 2-
2
T, M, D, S data 2+
3
T, M, D, S data 2/4 shield
4
T, M, D, S data 4-
5
T, M, D, S data 4+
6
DDC clock
7
DDC clock
8
NC
9
T, M, D, S data 1-
10
T, M, D, S data 1+
11
T, M, D, S data 1/3 shield
12
T, M, D, S data 3-
13
T, M, D, S data 3+
14
+5 V
15
GND
16
Hot plug detection
17
T, M, D, S data 0-
18
T, M, D, S data 0+
19
T, M, D, S data 0/5 shield
20
T, M, D, S data 5-
21
T, M, D, S data 5+
22
T, M, D, S clock shield
23
T, M, D, S clock +
24
T, M, D, S clock -