TP-LINK TL-PA4010P 用户手册

 

8

 

This section describes how to connect the Powerline Adapter into your existing ADSL broadband 
connection via ADSL Ethernet port. Follow the procedures described below to connect the Powerline 
Adapter to your ADSL broadband connection: 

1． Connect one end of the provided Ethernet (RJ-45) cable to the Powerline Adapter’s Ethernet port. 

2． Connect the other end of the Ethernet (RJ-45) cable to an available Ethernet port of your ADSL 

broadband Router. 

3． Plug the Powerline Adapter into a wall socket next to the computer. 

4． Turn on your computer. 

5． Check and confirm that the Power LED 

, Ethernet  LED 

, and Powerline LED 

 on the 

Powerline Adapter are ON. 

The hardware connection mechanism is shown below: 

 



Where the MAINS plug or an appliance coupler is used as the disconnected device, the disconnect 
device shall remain readily operable. The idle wall sockets or electrical outlets in

 

your household 

electrical circuit can be used normally without interference from the network.