Pelco C2907M-D 用户手册
C2907M-D (4/05)
53
r – RCP+ Menu
’e’ select video encoder number:
1
’c’
display connection list
’1’ connect to alarm IP:
172.16.0.99
’2’ disconnect all connections
’3’ G.711
audio:
On
’4’ join
stream:
172.16.0.99
’x’
leave this menu
’?’ this
menu
m – Misc Menu
’v’
get version info
’x’
leave this menu
’?’ this
menu
TERMINAL PROGRAM RECEIVER MENU STRUCTURE
The following describes the terminal program receiver menu structure. The menu items and commands are enclosed in single quotation marks.
Do not enter the quotation marks. Information and current settings are displayed to the right of the commands. Refer to the Command Reference
section for descriptions of the commands.
Do not enter the quotation marks. Information and current settings are displayed to the right of the commands. Refer to the Command Reference
section for descriptions of the commands.
Main Menu
’i’ IP
’r’ Rcp+
’m’ misc
’?’ this
menu
’q’ exit/logout
i – IP Menu
An asterisk (*) means a reset of the NET350 after a change is necessary. Reboot by cycling the power.
’i’
local IP (*):
172.16.0.95
’s’
local subnet mask (*):
255.255.0.0
’g’ local gateway (*):
0.0.0.0
’r’ remote
IP:
0.0.0.0
Mac address:
00-07-5f-30-00-32
’a’ auto connect (off)
’p’ ping remote IP (off)
’x’
leave this menu
’?’ this
menu
r – RCP+ Menu
’e’ select video encoder number:
1
’c’
display connection list
’1’ connect to alarm
IP: 0.0.0.0
’2’ disconnect all connections
’3’ G.711
audio:
On
’4’ join
stream:
0.0.0.0
’x’
leave this menu
’?’ this
menu
m – Misc Menu
’v’
get version info
’x’
leave this menu
’?’ this
menu