PioneerPOS G24-LC 用户手册

This command allows control of Unstructured Supplementary Service Data (USSD), according to 
GSM 02.90. Mobile-initiated operations are supported.

The following table shows the +CUSD parameters.

The Set command enables/disables the 
display of the following unsolicited 
result code, +CUSD: <m>[,<str>] (the 
USSD response from the network), to 
the TE. The new value is not retained 
after a power cycle.

The Read command displays the 
current value of <n>.

The Test command displays the 
supported values of <n>.

Sets/displays the result code presentation status of the G24-L.
0

Disable (default)

1

Enable

2

Cancel session

A USSD string that, when included, causes a mobile-initiated USSD string or 
response USSD string to be sent to the network. The response USSD string is returned 
in a subsequent unsolicited +CUSD result code.
<str> starts with either "*" or "#". The maximum length is 200 characters, based on 
+CSCS.
When <str> is not included, the network is not queried.

Whether further user action is required.
0

No further user action required (either network-initiated USSD-Notify, or no 

further information needed after a mobile-initiated operation)
1

Further user action required (either network-initiated USSD-Request, or 

further information needed after a mobile-initiated operation
2

USSD terminated by the network (the reason for the termination is indicated 

by the index, as described in 

3

Other local client has responded

4

Operation not supported

5

Network time out