PioneerPOS G24-LC 用户手册
Modem Configuration and Profile
3-194
G24-L AT Commands Reference Manual
April 15, 2008
S, Bit Map Registers
This command reads/writes values of the S-registers. The G24-L supports this command for
various S values, according to official specifications (ITU-I, ETSI, or manufacturer specific).
various S values, according to official specifications (ITU-I, ETSI, or manufacturer specific).
Command Type
Syntax
Response/Action
Remarks
Set
ATSn=<value>
OK
or:
+CME ERROR: <err>
The Set command is allowed for
read/write S-registers, and not allowed
for read-only S-registers.
read/write S-registers, and not allowed
for read-only S-registers.
Read
ATSn?
<current value of
S-register n>
or:
+CME ERROR: <err>
Test
The Test command for Sn is not
defined by ITU, and therefore is not
supported by the G24-L. The G24-L
returns an error.
defined by ITU, and therefore is not
supported by the G24-L. The G24-L
returns an error.