NDC comm NWH2610 用户手册

  Individual or batch mode remote management of the devices, 

including Multi-Monitor, Batch-Upgrade, Batch-Reset, and 

Bathc-LoadDefault.    Batch mode operation is useful when 

deploying multiple InstantWave products 

  Friendly user interface with a consistent look and feel 

A powerful automatic-discovery algorithm is built into the InstantWave Network 

Management System.    With a simple click on the “Discovery” icon, all 

InstantWave APs, WWBs, and WECs within the subnet will be discovered.    This 

discovery feature is based on the following techniques: 

 

•  DHCP Client and IP recovery:    InstantWave APs, WWBs, and 

WECs have a built-in DHCP client and will request an IP address 

from a DHCP server so that SNMP (Simple Network Management 

Protocol) can be further applied.    Should there be a failure of the 

DHCP server; when it recovers, the AP, WWB, and WEC will 

automatically negotiate for a new IP address 

 

•  Auto-IP:    When the AP, WWB, or WEC cannot get an IP address 

from a DHCP server, they will auto-assign an IP address of 

169.254.x.x , and a subnet mask of 255.255.0.0.     

A Windows OS PC originally configured as a DHCP client will 

follow the same algorithm to assign itself an IP address in the same 

subnet.    Users may need to renew the IP settings (see the following 

section), otherwise Windows may continue to use the previous IP 

address instead of executing the Auto-IP procedure 

 

    InstantWave 

10