Asrock K7NF2-raid K7NF2-RAID 用户手册

产品代码

K7NF2-RAID

1 3

2.6 Expansion Slots (PCI and AGP Slots)

There are 5 PCI slots and 1 A G P slot on K7NF2-RAID motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

AGP slot: The A G P slot is used to install an A G P graphics card.

Please do N O T insert a 3.3V A G P card into the A G P slot of K7NF2-RAID

motherboard! It may cause permanent damage! For the voltage

information of your VG A card, please check with the VG A card vendors.

Installing an expansion card

Step 1.

Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2.

Remove the system unit cover (if your motherboard is already installed in a

chassis).

Step 3.

Remove the bracket facing the slot that you intend to use. Keep the screws

for later use.

Step 4.

Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 5.

Fasten the card to the chassis with screws.

Step 6.

R eplace the system cover.