Viewsonic VS13789 用户手册

 

ViewSonic  WPD-100 

29 

In ‘WMM Setup Status’ block, current WMM settings will be displayed. And 
here are descriptions of every setup item: 

 

WMM Enable 

Check this box to enable WMM function. Please click 
‘Apply’ button on the right of this check box after you 
check or uncheck this box, so corresponding settings in 
this window will be activated or deactivated respectively.

WMM - Power 
Save Enable 

Check this box to enable WMM power saving mode to 
save energy, and let your computer’s battery live longer. 
 
You also have to select WMM power save modes here: 
 
AC_BE: Best Performance 
AC_BK: Worst Performance 
AC_VI: Video data has priority 
AC_VO: Voice data has priority 

Direct Link Setup 
Enable 

If you have another WMM-enabled wireless device, you 
can enter its MAC address here, then click ‘Apply’ 
button, and this network card will establish a direct link to 
the wireless device you specified here. 
 
You also have to specify the timeout value of this 
directly-linked wireless device. Valid values are from 1 to 
65535 (seconds), and input ‘0’ for infinity. 
 
If you want to remove a specific wireless device from 
direct link table, select the device and click this button to 
remove it.