Nokia 12 GSM MODULE REMOTE I/O 用户手册

 

When you have completed the above steps, Configurator automatically 
establishes a connection between the PC and the Nokia 12 GSM Module when 
Configurator is started. 

Connect the device to be controlled with the Remote I/O control to the Nokia 12 
GSM Module through the M2M system interface. The general-purpose inputs 
and outputs of the M2M system connector that are described in Chapter 6 are 
connected to the device. 

More information about how to connect a device electrically to the Nokia 12 
GSM Module and about the recommended connector types is provided in Nokia 
12 GSM Module HW Integration Manual. 

To use the Remote I/O control of the Nokia 12 GSM Module, you have to 
configure these settings: 

•  Message identifier 
•  SMS centre address 
•  You can also configure the following optional settings (described in Chapter 

•  Disabling acknowledgements 
•  Security settings 
•  Input settings 
•  Defining aliases for text messages 
•  Initial output value settings 
•  GPS port settings 
Use Nokia 12 Configurator to configure the settings of the Nokia 12 GSM 
Module. Download Configurator at 

. You can also use a control message 

(short message) for the optional settings. 

The following sections describe the process of getting started with the Remote 
I/O control.   

 

Note: To use Configurator, you need the Nokia 12 GSM Module and a test board. 
The Nokia 12 GSM Module is connected to a compatible PC and Configurator with 
the test board. A power supply, data cable, antenna adapter, antenna, and SIM 
card are also needed. All these items are included in the Nokia 12 GSM Module 
test board sales package. 

 

 

8/49