Nokia 12 GSM MODULE REMOTE I/O 用户手册

 

OUTPUT_SET ALL OFF 

Set all outputs OFF 

OUTPUT_INVERT ALL 

Inverts all outputs 

OUTPUT PULSE ALL ON 
* 

All outputs pulse ON  * 

OUTPUT_PULSE ALL 
OFF * 

All outputs pulse OFF * 

INPUT_GET x 

Return a voltage of input x, x = pin number 1-11 

INPUT_GET ALL 

Return states of all inputs 

INPUT_GET_CHANGE x 

Subscribe a voltage limit alarm of input x, x = pin number 1-
11 

INPUT_GET_CHANGE 
ALL 

Subscribe a input state change of all inputs 

INPUT CHANGE CANCEL 
x 

Cancel input x subscription, x = pin number 1-11 

INPUT CHANGE CANCEL 
ALL 

Cancel all input subscriptions 

CHANGE_PWORD 

Change password 

OUTPUT PULSE CANCEL 
x

 

Cancel output x pulse, x = pin number 1-9 

OUTPUT PULSE CANCEL 
ALL

 

Cancel all outputs 

LOCATION_GET 

Get location information ** 

* The duration of the pulse will be added to the control message after the corresponding command. The format is the 
following: 

for example Output_Pulse 1 On 5m30s 

For more information about pulse commands, see Chapter 9.3.7. 

** The location support needs external GPS device to be connected to the Nokia 12 GSM Module. The Nokia 12 
GSM Module supports NMEA-0183 protocol.

 

The Nokia 12 GSM Module supports the status messages listed in  

Table 5. You can define an alias for each of them. The messages will be sent 
as responses to device query control messages according to the current 
command and device state.  

 

 

28/49