Nortel Networks 201i 用户手册
Preparing peripheral devices
Standard 1.07
124
CallPilot
Setting the modem DIP switches
Introduction
Set the modem DIP switches to their default settings. This section describes
how to set the modem DIP switches if they have been changed from the
default settings.
how to set the modem DIP switches if they have been changed from the
default settings.
To set the modem DIP switches
Ensure that the DIP switches are set as described in the following table. Use
a pair of tweezers or small screwdriver to set the DIP switches.
a pair of tweezers or small screwdriver to set the DIP switches.
Note: The DIP switches are located on the back of the modem. ON is down.
OFF is up.
OFF is up.
DIP
switch
switch
Default
setting
setting
Function
1
OFF
Data Terminal Ready (DTR) override
OFF: Normal DTR operations (The computer must
provide a DTR signal for the modem to accept
commands. When DTR is dropped, the call is
terminated.)
provide a DTR signal for the modem to accept
commands. When DTR is dropped, the call is
terminated.)
ON: Modem ignores DTR (override)
2
OFF
Verbal/numeric result codes
OFF: Displays verbal (word) results
ON: Displays numeric results
3
ON Result
code
display
OFF: Suppresses result codes
ON: Enables result codes