Nortel Networks 4050 用户手册
116 Chapter 3 Managing the network access devices
320818-A
To disable or enable the network access device, perform the following steps:
1
Select the Secure Access Domain > domain > Switches > switch >
Configuration tab.
Configuration tab.
).
Figure 16
Switch Configuration screen
2
Ensure the Enable Switch setting is correct.
•
selected — the network access device is enabled
•
cleared — the network access device is disabled
3
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.