Nortel Networks 4050 用户手册
Chapter 10 Configuring system settings 527
Nortel Secure Network Access Switch 4050 User Guide
The Add Access Host dialog box appears (see
).
Figure 144
Add Access Host
3
Enter the access host information in the fields provided.
describes
the Add Access Host fields.
4
Click Add.
The new host appears in the table. An index number is automatically assigned
to the entry.
to the entry.
5
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Removing an Access List entry
To remove an existing entry from the access list, perform the following steps:
1
Select the System > Access List tab.
The Access List Table appears (see
2
Select an entry from the Access List Table to remove.
3
Click Delete.
A confirmation dialog appears.
Table 104
Add Access Host fields
Field
Description
IP Address
Specifies the IP address of the host to be allowed access.
Network mask
Specifies the subnet mask. You can set the mask to specify
a single machine or a range of machines on a specific
network.
a single machine or a range of machines on a specific
network.