Nxp Semiconductors UM10237 用户手册

UM10237_2

© NXP B.V. 2008. All rights reserved.

Setting function pointer:

iap_entry=(IAP) IAP_LOCATION;

Whenever you wish to call IAP you could use the following statement.

iap_entry (command, result);

The IAP call could be simplified further by using the symbol definition file feature 
supported by ARM Linker in ADS (ARM Developer Suite). You could also call the IAP 
routine using assembly code.

The following symbol definitions can be used to link IAP routine and user application:

#<SYMDEFS># ARM Linker, ADS1.2 [Build 826]: Last Updated: Wed May 08 16:12:23 2002

0x7fffff90 T rm_init_entry

0x7fffffa0 A rm_undef_handler

0x7fffffb0 A rm_prefetchabort_handler

0x7fffffc0 A rm_dataabort_handler

0x7fffffd0 A rm_irqhandler

0x7fffffe0 A rm_irqhandler2

0x7ffffff0 T iap_entry

As per the ARM specification (The ARM Thumb Procedure Call Standard SWS ESPC 
0002 A-05) up to 4 parameters can be passed in the r0, r1, r2 and r3 registers 
respectively. Additional parameters are passed on the stack. Up to 4 parameters can be 
returned in the r0, r1, r2 and r3 registers respectively. Additional parameters are returned 
indirectly via memory. Some of the IAP calls require more than 4 parameters. If the ARM 
suggested scheme is used for the parameter passing/returning then it might create 
problems due to difference in the C compiler implementation from different vendors. The 
suggested parameter passing scheme reduces such risk.

 

Read Part ID

54

10

Read Boot code version

55

10

Compare

56

10

Reinvoke ISP

57

10