Extron electronic SMB 205 L 产品宣传页

N

For tabletop placement, the four included adhesive rubber feet may be applied to 

the bottom corners of the mounting base.

 

For angled installations, securely mount the SMB using the two keyhole slots 

and/or mounting holes in the mounting base.

 

Mount the SMB using the keyhole slots and/or  

the mounting holes: 

•  Position the SMB at the 

desired location.

•  Mark the holes on the 

surface to be drilled.  See 

the illustration at right.

Drill 1/16" pilot holes for 

the keyhole slots or the 

mounting holes.  For the 

keyhole slots, insert screws 

into the pilot holes, but 

do not tighten them down until the SMB is slid into position.  For the mounting 

holes, position the SMB over the holes and secure the SMB into position.

Cables may access the SMB through the AAP openings in the rear panel and the 

bottom mounting base.

 

If cables are to access the SMB through the rear panel, use the rear panel AAP 

openings, as shown here.  AAP modules are sold separately.

Rear

Mounting
Nuts

AAPs
(not included)

Optional Split AAP

Mark pilot holes
for keyhole slot (1/16”)
or mounting hole (1/16”).

Mark pilot holes
for keyhole slot (1/16”)
or mounting hole (1/16”).

Extron Electronics, USA

1230 South Lewis Street

Anaheim, CA  92805

800.633.9876  714.491.1500  

FAX  714.491.1517

Extron Electronics, Europe

Beeldschermweg 6C

3821 AH Amersfoort, The Netherlands

+800.3987.6673  +31.33.453.4040

FAX +31.33.453.4050

Extron Electronics, Asia

135 Joo Seng Rd. #04-01

PM Industrial Bldg., Singapore  368363

+800.7339.8766  +65.6383.4400  

FAX  +65.6383.4664

Extron Electronics, Japan

Kyodo Building, 16 Ichibancho

Chiyoda-ku, Tokyo 102-0082

Japan

+81.3.3511.7655  FAX  +81.3.3511.7656

Number of accessible AAP openings

SMB 203 L ...........................  1 double-space (back), 1 double-space (bottom)
SMB 205 L ...........................  2 double-space (back), 2 double-space (bottom)

Included blank AAP plates

SMB 203 L ...........................  1 double-space
SMB 205 L ...........................  2 double-space

Furniture mounting holes ............  4 (2 are slotted)
Cable management lance punches
SMB 203 L .......................................  2
SMB 205 L .......................................  3
Front angle .....................................  36° from vertical, 54° from horizontal
Product weight

SMB 203 L ...........................  1.1 lbs (0.5 kg)
SMB 205 L ...........................  1.6 lbs (0.7 kg)

Shipping weight ............................  2 lbs (1 kg)
Vibration  ........................................  ISTA 1A in carton (International Safe Transit 

Association)

Warranty  ........................................  3 years parts and labor

N  Specifications are subject to change without notice.

68-1497-01  Rev. A

11 07

SMB 203 L (black, white)

60-942-02, -03

SMB 205 L (black, white)

60-943-02, -03

These items are included in each order of the SMB 203 L or SMB 205 L.

Adhesive rubber feet (4)

Blank double-spaced AAP (1), SMB 203 L only 

70-090-12 (black) 

 

70-090-22 (white)

Blank double-spaced AAP (2), SMB 205 L only

70-090-12 (black) 

 

70-090-22 (white)