Finisar Surveyor 用户手册

10-2

The expert views present expert information on capture files, a capture buffer, or in 
monitoring mode. The following Expert views are available from the 

 or 

 toolbar:

Expert views are available from the Data Views or Capture View toolbars, 
if supported by the current resource. The Expert system presents a matrix of 
different views showing network symptoms, analyses, and entities by proto-
col layer. Also, an Expert Diagnostic Message showing the definition, pos-
sible causes, and suggested actions can be obtained for any symptom or 
analyses. 

The Application Response Time view depicts performance information for 
specific applications. For each supported application the Application 
Response Time View will present the Application, Minimum Response 
Time (Min Time), Maximum Response Time (Max Time), Average 
Response Times (Avg Time), and the Number of Connections (Connec-
tions) processed to derive these times. 

The Duplicate Network Address view depicts each duplicate network (IP/
IPX) address detected and its associated MAC layer bindings. 

See Chapter 6, “Views” for more information on Expert Views.

When Surveyor finds an event that could indicate a network problem, the event is 
logged in appropriate tables, and the appropriate counters are incremented in the 
overview tables. 

When you press the 

 button to start Expert View, overview tables of symptoms 

are displayed. An example of the symptom overview tables is shown in Figure 10-1. 
You can access different expert views by clicking one of the layer buttons to the left 
of the tables, or by selecting one of the tabs at the bottom. One side of the matrix 
selects an overview or a breakdown by protocol layer. The tabs at the bottom form 
the other axis, allowing views of symptoms, analyses, or network entities.