Gefen EXT-HDMI-5BNC 用户手册
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE HDMI OVER RGB
The HDMI Over RGB is designed for either 4 or 5 BNC cable type setups.
•
When 5 BNC cables are present and used, a power supply on the HDMI
Over RGB Receiver will not need to be used. Power will be transmitted over
the cables. When a 4 BNC cable setup is used, a second power supply
(part# EXT-PS52AU) for the receiving unit will need to be purchased and
connected.
Over RGB Receiver will not need to be used. Power will be transmitted over
the cables. When a 4 BNC cable setup is used, a second power supply
(part# EXT-PS52AU) for the receiving unit will need to be purchased and
connected.
HDMI 1.3 compliant. Please see page 3 for a listing of supported HDMI 1.3
•
features.
HDCP compliant.
•
The HDMI Over RGB has an IR repeater feature that will send standard
•
IR remote control commands from the receiver back to the sender. This
is useful for controlling equipment from a remote location. IR commands
cannot be relyed from the sender to the receiver. Please see page 8 for
more details.
is useful for controlling equipment from a remote location. IR commands
cannot be relyed from the sender to the receiver. Please see page 8 for
more details.
Resolutions of up to 1080p Full HD are supported for HDTV use.
•
Resolutions of up to 1920 x 1200 are supported for computer use.
•
The HDMI Over RGB was designed for use with 75
•
Ω coaxial cable.
2
OPERATION NOTES