Gigabyte GA-8ANXP-D 用户手册

下载
页码 88
GA-8ANXP-D Motherboard
- 42 -
English
2-6
PC Health Status
Current Voltage(V) Vcore / DDR18V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/POWER/SYSTEM FAN Speed (RPM)
Detect CPU/POWER/SYSTEM Fan speed status automatically.
CPU Warning Temperature
60
o
C / 140
o
F
Monitor CPU temperature at 60
o
C / 140
o
F.
70
o
C / 158
o
F
Monitor CPU temperature at 70
o
C / 158
o
F.
80
o
C / 176
o
F
Monitor CPU temperature at 80
o
C / 176
o
F.
90
o
C / 194
o
F
Monitor CPU temperature at 90
o
C / 194
o
F.
Disabled
Disable this function. (Default value)
CPU/POWER/SYSEM FAN Fail Warning
Disabled
Fan warning function disable. (Default value)
Enabled
Fan warning function enable.
CPU Smart FAN Control
Disabled
Disable this function.
Enabled
Enable CPU Smart Fan control function. (Default value)
a. When the CPU temperature is higher than 65 degrees Celsius, CPU fan
will run at full speed.
b. The speed of CPU fan will increase linearly depand on the temperature if
the temperature is more than 41 degree and less than 65 degree.
c. When the CPU temperature is lower than 40 degrees Celsius, CPU fan will
be disable.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PC Health Status
Vcore
OK
DDR18V
OK
+3.3V
OK
+12V
OK
Current CPU Temperature
50
o
C
Current CPU FAN Speed
3308 RPM
Current POWER FAN Speed
0      RPM
Current SYSTEM FAN Speed
0      RPM
CPU Warning Temperature
[Disabled]
CPU FAN Fail Warning
[Disabled]
POWER FAN Fail Warning
[Disabled]
SYSTEM FAN Fail Warning
[Disabled]
CPU Smart FAN Control
[Enabled]
CPU FAN PIN Type
[3 PIN]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language          F5: Previous Values          F6: Fail-Save Default          F7: Optimized Defaults
Item Help
Menu Level`
[Disabled]
Don't reset case
open status
[Enabled]
Clear case open status
and set to be Disabled
at next boot