Sun Microsystems 2.0 用户手册
Chapter 2
Hardware Installation and Removal
9
▼
To Install the NEM
1. Attach an antistatic strap (refer to
).
2. Refer to your system installation or service manual to determine an appropriate
slot in which to install the NEM.
3. Unpack the NEM and remove it from the antistatic bag.
4. Locate a vacant NEM slot in the back of the chassis. Ensure the label on top of the
NEM is facing up.
5. Align the NEM with the vacant slot.
Ensure that the NEM’s port connectors are facing toward you and that the NEM
ejector levers are fully opened.
ejector levers are fully opened.
FIGURE 2-1
NEM Ejector Levers
Ejector Levers