Sun Microsystems 2.0 用户手册

Sun StorageTek 4 Gb FC NEM 20-Port Host Bus Adapter User’s Guide • May 2007

You can use the ILOM web interface or ILOM CLI to verify

Using the ILOM Web Interface

1. Log in to the ILOM web interface using the IP address of the active Chassis

Monitoring Module.

The first page of the ILOM web interface is displayed.

2. In the left navigation pane, select CMM (Chassis Monitoring Module).

The ILOM Version Information page is displayed.

3. Select the System Information tab, and then the Components tab.

The Component Management page is displayed.

4. Verify that the selected NEM has returned the expected feedback.

See

Using the ILOM CLI

1. Log in to the ILOM CLI of the active Chassis Monitoring Module.

2. For a list of components in your system, type:

show /CH

3. To verify that the NEM Ready to Remove status has changed to Not Ready, type:

show /CH/

component prepare_to_remove_status

The system returns:

prepare_to_remove_status = Not Ready

4. Verify that the selected NEM has returned the expected feedback.

See

▼

To Verify NEM Status

See

for a description of the LED states for the NEM. See

for the

location of the LEDs, Attention button, and Locator button.

1. Check the following LEDs to verify that the NEM is ready for a hot-plug

insertion.