Sun Microsystems 3U 用户手册
110
SunATM 3U CompactPCI Adapter Installation and User’s Guide • February 2001
Error Messages
This section includes a list of some of the most common error messages you might
see while configuring and bringing up your SunATM interface. For each message,
there is a brief explanation of the problem and a possible solution.
see while configuring and bringing up your SunATM interface. For each message,
there is a brief explanation of the problem and a possible solution.
Error Messages from
S00sunatm
Cannot find ATM utilities in /etc/opt/SUNWconn/atm/bin;
exiting S00sunatm.
The SunATM utility directory
/etc/opt/SUNWconn/atm/bin
does not exist.
Make sure that the SUNWatm package installation completed successfully (see
“To Check the Package Installation Using pkgchk” on page 8 for more
information). You might need to reinstall the package.
“To Check the Package Installation Using pkgchk” on page 8 for more
information). You might need to reinstall the package.
Cannot find atmconfig file in /etc; exiting S00sunatm.
The
/etc/opt/SUNWconn/atm/atmconfig
file provides configuration
information to the
S00sunatm
script so that it can bring up the SunATM
interfaces during system boot. If the
/etc/opt/SUNWconn/atm/atmconfig
file
is not present,
S00sunatm
prints this warning message and exits. The
/etc/opt/SUNWconn/atm/atmconfig
file is installed with the
SUNWatm
package as
/etc/opt/SUNWconn/atm/atmconfig.template
; if you choose
autoconfiguration
or if no previous
/etc/opt/SUNWconn/atm/atmconfig
file exists,
pkgadd
copies this template file to
/etc/opt/SUNWconn/atm/
atmconfig
. If a previous
/etc/opt/SUNWconn/atm/atmconfig
file exists, it is
not overwritten. See “Editing the atmconfig File” on page 42.
warning: can't plumb <device>; no UNI version provided
The first entry in
/etc/opt/SUNWconn/atm/atmconfig
for a physical interface
must include a UNI value in the second field.
warning: can't plumb <uni version> on <device>; <uni version>
already plumbed
The system encountered an entry that attempted to plumb a signalling version on
an interface that has already been plumbed with a different signalling version.
The script ignores the new UNI version and continues processing the entry and
the remaining entries in the file.
an interface that has already been plumbed with a different signalling version.
The script ignores the new UNI version and continues processing the entry and
the remaining entries in the file.