Sun Microsystems 3U 用户手册
Chapter 3
Installing and Extracting the Adapter
21
6. Pull back the ejection lever.
7. Slide the card out of the cPCI slot.
▼
To Extract the Adapter from a Cold
Environment
Environment
1. Before shutting down the operating environment and halting the system, ensure
that all significant application activity on the server has stopped.
2. Follow the appropriate procedures, as documented in the system’s service manual,
to shut down and halt the system.
Refer to the system’s documentation for the complete power down procedure.
3. Press the power switch on the system’s status panel to power down the system.
Refer to the system’s documentation for the location of the power switch.
4. Verify that the system’s power LED is off (unlit) indicating that the system is
completely powered off.
Once the system has been shut down and powered off, you can safely extract the
card.
card.
5. Pull back the ejection lever.
6. Slide the card out of the cPCI slot.