Lexmark SCTNE- 用户手册
113
Operations - TN3270E SETUP: MISC SETTINGS > Format Ctrl Sup (IDB Option 177)
Format Ctrl Sup
(IDB Option 177)
This SCS Options > MISC Settings option defines the suppression
of control codes after Power On.
of control codes after Power On.
Option Value
IDB Value
Comments
Normal *
0
Standard handling of control codes
after Power On. It can be disabled
with the <CSC>+M command.
after Power On. It can be disabled
with the <CSC>+M command.
No AutoNL
1
Is disabled after Power On in Host
direct print and Local Copy print. It
can be enabled with the <CSC>-M
command. All host generated codes
are still sent.
direct print and Local Copy print. It
can be enabled with the <CSC>-M
command. All host generated codes
are still sent.
No AutoNL’
2
Is diabled after Power On in Host
direct print. It can be enabled with
the <CSC>-M command. All host
generated codes are still sent.
direct print. It can be enabled with
the <CSC>-M command. All host
generated codes are still sent.
No Codes
3
CR, LF, NL and FF codes from the
host are suppressed and the auto-
NL function is disabled. It can be
enabled with the <CSC>-M
command.
host are suppressed and the auto-
NL function is disabled. It can be
enabled with the <CSC>-M
command.
Note: Because control codes are
suppressed, horizontal/vertical tab and
other commands which depend on correct
page format will not work correctly.
suppressed, horizontal/vertical tab and
other commands which depend on correct
page format will not work correctly.