Linksys FENSK05 用户手册

Novell Client32 Setup
for Windows 95 and 98

Client32 drivers are required for connecting to a 4.x or
5.0 server while in Windows 95 only.

If you are using Windows 98, you must obtain the latest
version of Client32. The installation is very similar to
that of Windows 95 OSR2. Follow the OSR2 (version
B) instructions below. When asked for the location of
the drivers, specify a:\client32 on the EtherFast 10/100
LAN Card program diskette.

Before you begin, obtain the Client32 disks or CD-
ROM from Novell. You may be able to download a copy
of the disk(s) from Novell's BBS or web site. 

Follow the directions below to install and/or configure
your Client32 drivers for use with the card. 

1. If Novell's Client32 drivers are already installed on
your computer, do the following to remove any network
adapter settings that may conflict with the EtherFast
card: Click on Start, Settings, Control Panel, and dou-
ble-click on the Network icon. If you see any network
adapters listed in the box, remove them. Finally, remove
all floppy disks from your computer and reboot.

2. If you have not installed Novell's Client32 drivers
onto your computer, run the Client32 SETUP.EXE pro-
gram. When the program appears, click Yes, followed
by Start to begin the installation. When Setup is fin-
ished copying files to your system, reboot. 

3. After Windows is up and running, remove all floppy
disks from your computer. Insert the EtherFast card into
your PC.

NetWare