Linksys FENSK05 用户手册
Installing a 5.0 Server
Follow these directions to set up a Novell NetWare 5.0
server.
server.
1. Insert the EtherFast 10/100 LAN Card program disk
into drive A.
into drive A.
2. At the NetWare prompt, run the INSTALL.NLM pro-
gram by typing:
gram by typing:
<server name>: LOAD INSTALL
and press Enter.
and press Enter.
3. Select the Maintenance/Selective Install option and
press Enter.
press Enter.
4. Select LAN Driver Options and press Enter.
5. Press the Ins key to specify other drivers that you
wish to install.
wish to install.
6. Press F3 and specify the driver path:
A:\NETWARE\SERVER\5.0 then press Enter.
7. The LNE100TX.LAN driver should appear in the
Select a LAN Driver field. Choose this driver to start
the driver loading and binding procedure. This will
allow you to load and bind all 4 frame types supported
by NetWare.
Select a LAN Driver field. Choose this driver to start
the driver loading and binding procedure. This will
allow you to load and bind all 4 frame types supported
by NetWare.
8. Add the LOAD and BIND statements required to the
server's AUTOEXEC.NCF file. This instructs the server
to load the LAN driver automatically each time the
server starts up.
server's AUTOEXEC.NCF file. This instructs the server
to load the LAN driver automatically each time the
server starts up.
44
NetWare