Maretron ALM100 用户手册

 

 

 

 

The ALM100 is designed to be mounted in an ANSI/NEMA WD 6 electrical switch box, but it 
may also be mounted directly into a wall. 
 
If mounting the ALM100 into an electrical box, which can in turn be surface-mounted onto a 
wall or bulkhead, attach the ALM100 securely to the electrical box using the included mounting 
screws or other fasteners as shown in Figure 1 below. 
 

Sounder Collar

Volume Control Shutter 

Volume Control Baffle Plate 

Electrical Box (not 

included)

ALM100 Alarm Module 

Volume Control Screw

ALM100 Faceplate  

Faceplate Gasket

Sounder Gasket 

ALM100 Mounting Screws (x2) 

NMEA 2000 Cable (not 

included)

Faceplate 

Mounting Screws 

(x2) 

 

 
If flush mounting the ALM100 into a wall, use the installation template in Section 7 as a guide 
to cut the hole in the wall and drill the mounting holes for the ALM100. Next, attach the 
ALM100 securely to the wall using the included mounting screws or other fasteners as shown 
in Figure 2 below.