Dialogic DM/IP481-2T1-PCI-100BT 产品宣传页

must install a CT Bus/SCbus Adapter on one of the CT 
Bus boards in a system. See the CT Bus/SCbus 
Adapter Quick Install Card for installation details for 
the Adapter and the bus cables. 

7.  Replace the computer cover when finished and 

reconnect the power cords. 

CAUTION:  If your BIOS is set up to use Plug and Play 

functionality, and there are non-DM3 ISA cards in the 
system, a conflict can be created because the DM3 
card could use the same IRQs that are assigned to an 
ISA card. This could cause the machine to stop 
responding. You can remove the conflict by 
determining which IRQs are used by the non-DM3 
ISA cards in the system and reserving them, in the 
BIOS, for ISA use only. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After Installing the 

Hardware 

After installing the hardware, run the Dialogic

®

 

Configuration Manager (DCM) as described in the 
installation instructions included with the Dialogic

®

 

System Software to configure your system. 

For technical specifications and product information go to: 

Warranty and Return 

Information

For specific warranty information for this board, refer to 
the Warranty section of the Products page, located at this 
URL: http://www.dialogic.com/warranties/.  

 

Dialogic provides technical support for its products 
through a network of value added distributors who are 
trained to answer technical questions on installing and 
configuring Dialogic

®

 products.  If you are unsure how 

to contact your support channel, please call Dialogic 
in the United States at 973-967-6600 (9am-5pm EST) 

and we will assist in obtaining the appropriate support 
channel.  Outside the United States please refer to 

 to obtain 

local contact information. 

 

Dialogic also provides direct support via Dialogic

®

 Pro™ 

Services agreements.  For more details of direct support 
from Dialogic please refer to: 

. 

To return a board for warranty repair or any other returns, 
please refer to the following: 

.  To return a 

board for warranty repair, please refer to the following: 
http://www.dialogic.com/support/hwfaults.  For all other 
returns, contact your vendor or Dialogic Customer Support 
(for more information, see 

 ). 

Sales Assistance 

 

If you have a sales question, please contact your 
local Sales Representative or the Regional Sales Office 
for your area. Address, telephone and fax numbers, are 
available at the Dialogic website located at: 

To purchase Dialogic

®

 products, please refer to the 

following website to locate the appropriate supplier.  

All contents of this document are furnished for informational use only and 
are subject to change without notice and do not represent a commitment on 
the part of Dialogic Corporation or its subsidiaries (“Dialogic”). 
Reasonable effort is made to ensure the accuracy of the information 
contained in the document. However, Dialogic does not warrant the 
accuracy of this information and cannot accept responsibility for errors, 
inaccuracies or omissions that may be contained in this document.  

INFORMATION IN THIS DOCUMENT IS PROVIDED IN 
CONNECTION WITH DIALOGIC

®

 PRODUCTS. NO LICENSE, 

EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY 
INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS 
DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT 
BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO 
LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY 
EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR 
USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR 
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR 
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY 
INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. 

Dialogic products are not intended for use in medical, life saving, life 
sustaining, critical control or safety systems, or in nuclear facility 
applications. 

It is possible that the use or implementation of any one of the concepts, 
applications, or ideas described in this document, in marketing collateral 
produced by or on web pages maintained by Dialogic may infringe one or 
more patents or other intellectual property rights owned by third parties. 
Dialogic does not provide any intellectual property licenses with the sale of 
Dialogic products other than a license to use such product in accordance 
with intellectual property owned or validly licensed by Dialogic and no 

such licenses are provided except pursuant to a signed agreement with 
Dialogic. More detailed information about such intellectual property is 
available from Dialogic’s legal department at 9800 Cavendish Blvd., 5

th

 

Floor, Montreal, Quebec, Canada H4M 2V9. Dialogic encourages all 
users of its products to procure all necessary intellectual property 
licenses required to implement any concepts or applications and does 
not condone or encourage any intellectual property infringement and 
disclaims any responsibility related thereto. These intellectual property 
licenses may differ from country to country and it is the responsibility 
of those who develop the concepts or applications to be aware of and 
comply with different national license requirements.  

Dialogic, Diva, Eicon, Eicon Networks, Eiconcard, Dialogic Pro and 
SIPcontrol, among others, are either registered trademarks or trademarks of 
Dialogic. Dialogic's trademarks may be used publicly only with permission 
from Dialogic. Such permission may only be granted by Dialogic’s legal 
department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada 
H4M 2V9. Any authorized use of Dialogic's trademarks will be subject to 
full respect of the trademark guidelines published by Dialogic from time to 
time and any use of Dialogic’s trademarks requires proper 
acknowledgement.  The names of actual companies and products 
mentioned herein are the trademarks of their respective owners.