Raritan Computer EMX2-111 用户手册
Appendix A: Using Raritan Asset Management Sensors with the EMX
333
Connecting AMS-M2-Z Asset Sensors (Optional)
The AMS-M2-Z is a special type of asset sensor that functions the same
as regular MASTER asset sensors with the following differences:
as regular MASTER asset sensors with the following differences:
It provides two RJ-45 connectors
Multiple AMS-M2-Z asset sensors can be daisy chained
Only two tag ports are available on each AMS-M2-Z so only two
asset tags can be connected
asset tags can be connected
This product is especially useful for tracking large devices such as SAN
boxes in the cabinet.
boxes in the cabinet.
Item
Description
A
RJ-45 connectors
B
Tag ports
To connect the AMS-M2-Z asset sensors to the EMX:
1. Connect the AMS-M2-Z to the EMX via a Category 5e/6 cable.
a. Connect one end of the cable to the RJ-45 port labeled "Input"
on the AMS-M2-Z.
b. Connect the other end of the cable to the FEATURE port on the
EMX.
2. Affix an asset tag to the IT device and connect this asset tag to the
AMS-M2-Z by plugging the tag connector into the tag port on the
AMS-M2-Z. See
AMS-M2-Z. See
Connecting Asset Sensors to the EMX
(on page
24) for details.
3. If necessary, daisy chain multiple AMS-M2-Z to track more than two
IT devices via this EMX.
a. Verify that the Category 5e/6 cable length is within the limitation.
See
AMS-M2-Z Daisy-Chain Limitations
(on page 334) for the
cable length limitations.
b. Connect one end of the Category 5e/6 cable to the RJ-45
connector labeled "Output" on the AMS-M2-Z being connected to
the EMX.
the EMX.