RAD Data comm RIC-155 用户手册
Chapter 3 Operation
RIC-155 Installation and Operation Manual
3-4 Configuration
Alternatives
Parameter Default
Value
Flow control
Enable
Ethernet mode
Full duplex
LAN speed
100 Mbps
Uplink
Frame type
SONET
BER threshold
Disable
EED threshold
10E
-3
SD threshold
10E
-6
J1 Tx path trace enable
Disable
J1 path trace
Physical Failure Forwarding
Disable
Bridge
Aging Time
304
Forwarding Mode
Filter
Statistics Counted
OK only
Multicast & Broadcast Rate
Limit
No Limit
DATA Port PVID
2
DATA Port PVID Priority
0
DATA Port Tag Stripping
No
MNG Port PVID
1
MNG Port PVID Priority
0
MNG Port Tag Stripping
No
POS Port Egress
Unmodified
3.4 Configuration
Alternatives
Managing RIC-155 via Terminal Port
RIC-155 includes a V.24/RS-232 asynchronous DTE port, designated CONTROL
and terminated in a 9-pin D-type female connector. The control port continuously
monitors the incoming data stream and immediately responds to any input string
and terminated in a 9-pin D-type female connector. The control port continuously
monitors the incoming data stream and immediately responds to any input string
received through this port. The port requires a cross-cable for the ASCII terminal
connection.
The RIC-155 control port can be configured to communicate at the following
rates: 9.6, 19.2, 38.4, 57.6 or 115.2 kbps. When running a terminal control
connection.
The RIC-155 control port can be configured to communicate at the following
rates: 9.6, 19.2, 38.4, 57.6 or 115.2 kbps. When running a terminal control