Raritan Computer Paragon II 用户手册
52
P
ARAGON
II
U
SER
G
UIDE
System Reboot and System Reset
System Reboot and System Reset commands affect your entire Paragon configuration, that is, if
you perform a System Reset on your base UMT, the third-tier UMT(s) will reset, then the second-
tier UMT(s) will reset, and finally the base UMT will reset. Each UMT sends a Ready-to-Reset
report to Paragon clients (P2SC, Paragon Manager, UST-IP, etc.) as an event log.
you perform a System Reset on your base UMT, the third-tier UMT(s) will reset, then the second-
tier UMT(s) will reset, and finally the base UMT will reset. Each UMT sends a Ready-to-Reset
report to Paragon clients (P2SC, Paragon Manager, UST-IP, etc.) as an event log.
System Reboot
To reboot your Paragon II from the OSUI, select option 5, System Reboot. from the
Administration Menu.
Administration Menu.
Figure 50 System Reboot Confirmation
The message bar will ask you to confirm the System Reboot command. You must type Y-E-S, the
complete word ‘Yes,’ and press ENTER to confirm, or press ESC to cancel. A “Reset” message
screen appears and remains onscreen while your system reboots. If you have multiple tiers, the
reboot will take slightly longer than if you are rebooting only a single UMT unit.
complete word ‘Yes,’ and press ENTER to confirm, or press ESC to cancel. A “Reset” message
screen appears and remains onscreen while your system reboots. If you have multiple tiers, the
reboot will take slightly longer than if you are rebooting only a single UMT unit.