Raritan Computer Paragon II 用户手册

62 

P

ARAGON 

II

 

U

SER 

G

UIDE 

 

 

 

 

Connecting Z-CIMs and P2ZCIMs as Tiers 

The following diagram shows setup guidelines for connecting Z-Series Z4200U Z-CIMs 
(UKVMSPDs) or Paragon II CIMs (P2ZCIMs): 

CIM installation requires that computers are assigned names when added to the CIM chain. The 
default name of any CIM is its serial number. In order to name the IM, it must be connected, 
powered on and connected to the UMT to get status and name assignment.  

To organize and track CIMs and the computers to which they are connected, Raritan recommends 
one of two methods: either record the serial numbers of the CIMs connected to each target, and 
then name all CIMs at one time once the chain is complete, or first complete the chain and then 
power on the CIMs one at a time, checking the serial number on the CIM as it is connected, and 
assigning the proper name to the proper target.  

When naming or renaming a CIM, switch to that CIM to activate it, thereby ensuring that its new 
name is updated in the UMT database. 

 All Paragon II components must be powered ON prior to Z-CIM or P2ZCIM tier installation. All 
computers in the CIM chain and all components must be powered OFF prior to installation.