Raritan Computer Paragon II 用户手册
66
P
ARAGON
II
U
SER
G
UIDE
Note: When following the installation and configuration instructions below, sort the Selection
Menu by Channel ID Number, not by Name. Display the menu by pressing the F2 key on your
keyboard and change the sorting method by pressing the F12 key.
Menu by Channel ID Number, not by Name. Display the menu by pressing the F2 key on your
keyboard and change the sorting method by pressing the F12 key.
All Paragon II components must be powered ON prior to P2ZCIM tier installation. All computers
in the P2ZCIM chain must be powered OFF prior to installation.
in the P2ZCIM chain must be powered OFF prior to installation.
Important: Please following these guidelines to ensure that there is enough power to
support all CIMs in a chain.
- For Paragon I UMT242, 442, 832 and 1664, hardware III and Paragon II firmware and
Paragon II UMTs; in chains up to 20 individual ZCIM units at least one P2ZCIM must be
powered ON; In P2ZCIMs chains from 21 to 42 ZCIM units, at least 15 P2ZCIMs must be
powered ON
support all CIMs in a chain.
- For Paragon I UMT242, 442, 832 and 1664, hardware III and Paragon II firmware and
Paragon II UMTs; in chains up to 20 individual ZCIM units at least one P2ZCIM must be
powered ON; In P2ZCIMs chains from 21 to 42 ZCIM units, at least 15 P2ZCIMs must be
powered ON
Connect a P2ZCIM as a Tier:
1. Connect a Category 5e UTP cable to the channel port on the Paragon II UMT unit reserved
for the P2ZCIM chain.
2. Connect the other end of this Category 5e UTP cable to the UTP OUT (O) port on a P2ZCIM,
which will be the first CIM in the chain.
3. Connect a computer to the first P2ZCIM.
A. Connect the 6-pin mini-DIN keyboard and mouse and HD15 video connectors on the
P2ZCIM to computer’s keyboard, mouse, and video ports.
B. Place the Z-CIM Terminator in the P2ZCIM’s UTP IN (I) port.
C. Power ON computer.
C. Power ON computer.
Attach new P2ZCIM to an Existing P2ZCIM Chain:
The size limit for a P2ZCIM chain is 42 units. When adding a new P2ZCIM to the chain, you
must resize the chain in the OSUI so that the Paragon UMT can ‘see’ the newly-added CIM.
Resizing the P2ZCIM chain does not change the name of the chain, it changes only the size of the
chain.
must resize the chain in the OSUI so that the Paragon UMT can ‘see’ the newly-added CIM.
Resizing the P2ZCIM chain does not change the name of the chain, it changes only the size of the
chain.
1. At a User Station Login Menu, type admin in the User Name field.
2. Type raritan or your new password in the Password field and press ENTER.
3. Go to the Channel View screen (view selection by channel).
4. Press the Home key.
5. Press the F5 key.
6. Go to the Channel Configuration screen.
7. Use the Ç and È or the Page Up and Page Down keys to select the P2ZCIM chain you wish
2. Type raritan or your new password in the Password field and press ENTER.
3. Go to the Channel View screen (view selection by channel).
4. Press the Home key.
5. Press the F5 key.
6. Go to the Channel Configuration screen.
7. Use the Ç and È or the Page Up and Page Down keys to select the P2ZCIM chain you wish
to resize.