Raritan Computer Paragon II 用户手册
70
P
ARAGON
II
U
SER
G
UIDE
Tiered Configurations
Standard Tiering Configurations
Single Base Configuration Guidelines
• Only Paragon I HW3 (running Paragon II code) or Paragon II can serve as base units.
• Only Paragon I HW3 (running Paragon II code) or Paragon II can serve as base units.
• The base unit must always be the latest released version, both in hardware and firmware.
• A maximum of three (3) tiers, including the base unit, is permitted.
• Devices that are not Paragon II Matrix Switches but have two or more channel ports, such as
• A maximum of three (3) tiers, including the base unit, is permitted.
• Devices that are not Paragon II Matrix Switches but have two or more channel ports, such as
Raritan MasterConsole, CompuSwitch, Z-CIM, or P2ZCIM, are treated as tier devices. These
devices cannot act as base devices in a Paragon II system and can be connected only to a base
unit or to a second tier Paragon II.
devices cannot act as base devices in a Paragon II system and can be connected only to a base
unit or to a second tier Paragon II.
Initialization of a single base configuration with tiered devices from upper to lower tier:
− After all devices have been connected, power ON the devices from upper tier to lower
tier.
− After initialization, each tiered device has an updated database.
Guidelines for changing connections of tiered devices:
Example A: Relocating an upper-tier device (refer to dotted line)
1. Disconnect some or all of the user ports on the tiered unit (UMT-3A) that connect to the
channel ports of the lower-tiered unit (UMT-2A) and re-connect the user ports to the channel
ports of another lower-tier unit (UMT-2B).
ports of another lower-tier unit (UMT-2B).
2. Recycle the power of tiered devices. This is recommended to build a clean database for the
UMT Matrix Switches. Sequence of recycling power is from the highest tier (tier 3) to the
base unit. In our example: UMT-3A
base unit. In our example: UMT-3A
→ UMT-2A→ UMT-2B → UMT-Base.
3. The operation is the same for devices that are not UMT Matrix Switches.
Figure 59 Single Base Configuration
UST
UST
Non-UMT tier
device-3A
UMT-3A
UMT-3B
Non-UMT tier
device-3B
Non-UMT tier
device-2A
UMT-2A
UMT-2B
Non-UMT tier
device-2B
UMT-Base