Raritan Computer Paragon II 用户手册

A

PPENDIX 

D:

 

P

ARAGON 

II

 

R

ACK 

M

OUNT 

 89 

 

 

 

Appendix D: Paragon II Rack Mount  

Paragon II User Stations and most Base Units can be mounted in 1U (1.75", 4.4 cm) of vertical 
space in a standard 19" equipment rack; P2-UMT1664M Base Units can be mounted in 2U (3.5", 
8.9 cm) of space. To rackmount a Base Unit, use the brackets and screws that came with the unit; 
to rackmount a User Station, use the RMKSMU rackmount kit. (If you lose or damage a Base 
Unit’s brackets, replace them with the RMKSM1 kit for any 1U Base Unit or RMKSM2 for a P2-
UMT1664M.) You can mount a Base Unit or User Station facing the front of the rack or facing 
the rear. 

 

Forward Mount 

1.  Secure the cable-support bar to the back end of the side brackets using two of the included 

screws. 

2.  Slide the User Station or Base Unit between the side brackets, with its rear panel facing the 

cable-support bar, until its front panel is flush with the “ears” of the side brackets. 

3.  Secure the User Station or Base Unit to the side brackets using the remaining included screws 

(three on each side). 

4.  Mount the entire assembly in your rack and secure the side brackets’ ears to the rack’s front 

rails with your own screws, bolts, cage nuts, etc. 

5.  When you attach cables to the connectors on the rear panel of the User Station or Base Unit, 

drape them over the cable-support bar. 

 

 

1.

1.

2.

3.

3.

4.

4.

5.