Rosewill RC201 用户手册
SATA 150 RAID 2 Port PCI Host
RC201 User Manual
procedures to install Windows accordingly.
2.
Once Windows has been installed, click My Computer, then click Properties. Click Device Manager
tab.
3.
Double click Other Devices then PCI RAID Controller.
4.
Click Driver tab, then Update Driver.
5.
Insert the Driver CD, check Specify the location of the driver (Advanced) and click Next.
6.
Select Search for the better driver option, check Specify a location, uncheck Removable
Media, type in E:\ (If your CD-ROM/DVD is E:\), and click Browse.
7.
Points specify a location, example E:\SATA Raid_2Port\ Sil3x12\ Win98_me _2000_xp_nt4.0 \
Driver, click OK and then Next.
8.
Click Next and then Finish.
9.
Remove the Driver diskette and click Yes to restart Windows to complete driver installation.
For Existing Windows ME Systems
1.
After the SATA RAID PCI Host Adapter and attached drives are configured, boot up Windows.
2.
At the Add New Hardware Wizard, check Specify the location of the driver (advanced), and
click Next.
3.
Insert the Driver CD, check Specify a location, uncheck the other boxes, and click Browse.
4.
Points specify a location, example E:\SATA Raid_2Port\ Sil3x12\ Win98_me _2000_xp_nt4.0 \
Driver, click OK and then Next.(If your CD-ROM/DVD is E:\)
5.
Click Next and then Finish.
Verification of the Proper Installation for Windows 98/98SE/ME
1.
Double click My Computer/Control Panel/System. Click Device Manager tab.
2.
Double click SCSI Controllers, Silicon Image Sil-3x12 SATA Raid Controller should be
listed.
3.
Highlight Silicon Image Sil-3x12 SATA Raid Controller and click Properties. A message
This device is working properly is displayed in the dialog box, the driver has been correctly installed.
If any error message is displayed, remove Silicon Image Sil-3x12 SATA Raid Controller and
restart your system.
If any error message is displayed, remove Silicon Image Sil-3x12 SATA Raid Controller and
restart your system.
4.3. Windows NT 4.0 Driver Installation
For New Windows NT 4.0 System
1.
Before installation, copy all the files under directory E:\SATA Raid_2Port\ Sil3x12\ Win98_me
_2000_xp_nt4.0\ driver\ *.* to a blank floppy disk
2.
After the SATA RAID PCI Host Adapter and attached drives are configured, follow Microsoft
procedures to install Windows accordingly.
3.
At the Windows Set-up screen, press F6 to specify and add the driver.
4.
Press S, select Other, then press Enter.
5.
Insert the Driver diskette and press Enter.
6.
Select Silicon Image Sil-3x12 SATA Raid Controller Driver and press Enter.
7.
Press Enter to continue and follow on-screen instructions to complete Windows NT 4.0
installation.
Add Windows NT 4.0 Driver on Original Booting Device
1.
After the SATA RAID PCI Host Adapter and attached drives are configured, boot up Windows. Double
click My Computer/Control Panel/SCSI Adapters, then click the Drivers tab.
2.
Click Add… then Have Disk....
3.
Insert the Driver CD in your CD-ROM/DVD drive and type in E:\ (If your CD-ROM/DVD is E:\), then click
Browse.
4.
Points specify a location, example E:\SATA Raid_2Port\ Sil3x12\ Win98_me _2000_xp_nt4.0 \
9