Rosewill RC-110 用户手册
2
User Manual
USB 2.0 + 1394a PCI Adapter RC110
camcorders, disk drives, printers and scanners with 1394 interfaces.
• Supports Windows 98, Windows 98SE, Windows ME, Windows 2000 & Windows XP
USB 2.0 Features
• Supports up to 127 devices
• Supports devices hot swap and wake-up
• Output current per port = 500mA (max)
• Supports Windows 98, Windows 98SE, Windows ME, Windows 2000 & Windows XP
Troubleshooting
If your system doesn’t work properly after connecting to a 1394 device, please turn off your
computer. Connect the auxiliary power connector (J2/J2-A) to power supply and then restart
again. If it still doesn’t solve the problem, please refer to the specifications of your 1394 device.
Check the power consumption and make sure it doesn’t exceed 15W.
computer. Connect the auxiliary power connector (J2/J2-A) to power supply and then restart
again. If it still doesn’t solve the problem, please refer to the specifications of your 1394 device.
Check the power consumption and make sure it doesn’t exceed 15W.
Driver Installation
Windows ME
Once the IEEE1394 + USB 2.0 Host Adaptor is installed and the computer is restarted, Windows
will detect the board and automatic find the new hardware and install driver for it.
devices in Device Manager.
Once the IEEE1394 + USB 2.0 Host Adaptor is installed and the computer is restarted, Windows
will detect the board and automatic find the new hardware and install driver for it.
devices in Device Manager.
1.
Windows has found new hardware “NEC Firewarden OHCI Compliant IEEE 1394 Host
Controller” and click Next to continue