Renesas R0E530640MCU00 用户手册
R0E530640MCU00 User’s Manual
6. Troubleshooting (Action on Error)
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 212 of 229
Page 212 of 229
6.2 Self-check Error
When an error occurs in the self-check, check the following.
(1) Recheck the connection of the E100 emulator main unit and MCU unit.
(2) Redownload the proper firmware.
(3) Check the self-check error log of the debugger software, and refer to the instruction described in it. (See Figure 6.2)
(1) Recheck the connection of the E100 emulator main unit and MCU unit.
(2) Redownload the proper firmware.
(3) Check the self-check error log of the debugger software, and refer to the instruction described in it. (See Figure 6.2)
“
Error occurred during the self-check test.”
dialog is displayed.
Click the OK button.
Check the log in the self-check dialog.
Refer to instructions described in the log.
Figure 6.2 Flowchart to check the self-check error
IMPORTANT
Notes on the Self-check:
z
Be sure to execute the self-check without connecting to a converter board and the user system.
z
When the self-check does not result normally (excluding the target status error), the product may be damaged.
Contact your local distributor.