Renesas R8C/Tiny Series 用户手册

 

The Reset circuit operates by latching the state of the boot switch on pressing the reset button. This control is subsequently used to 

modify the mode pin states as required. 

The reset is held in the active state for a fixed period by a pair of resistors and a capacitor. Please check the reset requirements carefully 

to ensure the reset circuit on the customers’ board meets all the reset timing requirements. 

6.9. LIN Interface 

This Renesas Starter Kit has hardware LIN interface. The interface is available on connector ‘LIN’. The connector ‘J5’ functions as power 

connector for LIN. The device can be operated either in ‘Master’ mode or ‘Slave’ mode. The device performs LIN communication in 

cooperation with Timer RA and UART0. 

For more details on LIN interface please refer to R8C/2C Group, R8C/2D Group Hardware Manual. 

 

12