Renesas M306NKT3 用户手册
M306NKT3-RPD-E User’s Manual
2. Setup
REJ10J0326-0400 Rev.4.00 Sep. 01, 2006
Page 23 of 104
2.4 Connecting the PC4701
To connect the emulation pod to the PC4701, use the FLX120-RPD 120-pin flexible cable included with this product package.
Connect the PC4701 side connector of the FLX120-RPD to the cable connector of the PC4701, then secure with screws the
FLX120-RPD.
Connect the PC4701 side connector of the FLX120-RPD to the cable connector of the PC4701, then secure with screws the
FLX120-RPD.
2.4.1 Connecting the Cable to the PC4701
Figure 2.2 shows how to connect the PC4701 and FLX120-RPD.
Figure 2.2 shows how to connect the PC4701 and FLX120-RPD.
Figure 2.2 Connecting the cable to the PC4701
CAUTION
Note on Connecting the PC4701 and FLX120-RPD:
Always shut OFF power before connecting the cable. Otherwise, the internal circuits may be damaged.
IMPORTANT
Notes on Connecting the Cable and Securing the Screws:
To connect the FLX120-RPD, be sure to hold the both sides of the PC4701 side connector horizontally with the
"UPSIDE" facing up.
"UPSIDE" facing up.
After connecting the cable to the emulator main unit PC4701, be sure to secure the screws mounted in both
sides of the connector.
sides of the connector.
Emulator main unit
PC4701 side connector
of FLX120-RPD
Secure this screw.
UPSIDE should be face up .
Secure this screw.