Renesas M306NKT3 用户手册

M306NKT3-RPD-E User’s Manual

3. Usage (How to Use the Emulator Debugger)

REJ10J0326-0400 Rev.4.00 Sep. 01, 2006

Page 50 of 104

3. Usage (How to Use the Emulator Debugger)

This chapter describes how to start up the M16C PC4701 emulator debugger from the High-performance Embedded Workshop
and how to use the main windows.

3.1. Making an MCU File

It is necessary to make an MCU file to use this product with the emulator debugger. According to the MCU you use, change
the contents of the MCU file. Make the MCU file named “M306NKT3.MCU” etc. following the description below using a text
editor and store it in the "mcufiles" folder in the directory where the emulator debugger is installed.

The emulator debugger has been installed in the following directory by default.

- When using the M16C PC4701 emulator debugger on the High-performance Embedded Workshop

C:\Program Files\Renesas\Hew\Tools\Renesas\DebugComp\Platform\PDTarget\PD30\McuFiles

- When using the M3T-PD30

C:\mtool\PD30\McuFiles

The MCU file contains information such as, SFR area, internal RAM area, internal ROM area, firmware file name. The
contents of the MCU file when using the M306NKFJGP (31KB RAM, 512KB ROM) are as follows:

: SFR area

Start address

3FF :

End

address

400

: Internal RAM

Start address

7FFF :

End

address

80000

: Internal ROM

Start address

FFFFF :

End

address

M30620P : Name of firmware

(Do not change.)

: Expansion No.

(Do not change.)

The contents of the MCU file when using the M306N4FGTFP (10KB RAM, 256KB ROM) are as follows:

: SFR area

Start address

3FF :

End

address

400

: Internal RAM

Start address

2BFF :

End

address

C0000

: Internal ROM

Start address

FFFFF :

End

address

M30620P : Name of firmware

(Do not change.)

: Expansion No.

(Do not change.)

When using this product in microprocessor mode, set the internal ROM area as follows.

00000

: Internal ROM

Start address

00001 :

End

address