IMC Networks iMcV-LIM 用户手册
11
LED Operation
Each iMcV-LIM module features diagnostic LEDs that provide information on features
and ports.
and ports.
FEF
Glows green when a fiber end fault is
detected.
detected.
TXLL
Glows green when TX LinkLoss is
enabled on the port.
Blinks when a fault occurs on the
copper port and actively disables the
fiber port.
enabled on the port.
Blinks when a fault occurs on the
copper port and actively disables the
fiber port.
LNK
Glows green when fiber link is
established.
Blinks green when activity is detected.
established.
Blinks green when activity is detected.
* DIS
Glows amber when software is
disabled on the TX port.
disabled on the TX port.
FA
Glows green when FiberAlert is
enabled.
Blinks green when active.
enabled.
Blinks green when active.
FXLL
Glows green when FX LinkLoss is
enabled on the port.
Blinks when a fault occurs on the fiber
port and actively disables the copper
port.
enabled on the port.
Blinks when a fault occurs on the fiber
port and actively disables the copper
port.
LNK
Glows green when fiber link is
established.
Blinks green when activity is detected.
established.
Blinks green when activity is detected.
* DIS
Glows amber when software is
disabled (via iView
disabled (via iView
2
) on the fiber port.
*For iMcV-LIM w/SFP and Configuration Control:
DIS indicates TX (copper) or TX (fiber) port is disabled either by DSW #7,8 or via
iView². Refer to the DIP Switch matrix under Unmanaged Modules.
iView². Refer to the DIP Switch matrix under Unmanaged Modules.
CONFIG CONTROL