IMC Networks iMcV-Giga-FiberLinX-II 用户手册
25
must enter Y in the Tags column for both the Optics row and Data row. Enter up to
32 VLAN IDs in the Data VLANs fields, plus one for SNMP.
32 VLAN IDs in the Data VLANs fields, plus one for SNMP.
Management VLAN and EXT MGMT Tag
This selection is available for all VLAN modes except for the default mode. Configure
a VLAN ID for management traffic by entering an ID in the VLAN IDs – Saved column
of the SNMP row (in this example, 200).
a VLAN ID for management traffic by entering an ID in the VLAN IDs – Saved column
of the SNMP row (in this example, 200).
The EXT MGMT tag parameter provides the option of adding the defined
Management VLAN ID to all untagged traffic entering the EXT MGMT port (EXT
Mgmt Tag = N) or restricting the EXT MGMT port to pass only traffic bearing this
VLAN ID (EXT Mgmt Tag = Y)
Management VLAN ID to all untagged traffic entering the EXT MGMT port (EXT
Mgmt Tag = N) or restricting the EXT MGMT port to pass only traffic bearing this
VLAN ID (EXT Mgmt Tag = Y)
Saved VLAN Values <Active after reboot>. Current VLAN Values <Active now>.
Tags
VLAN IDs Priorities
Current Saved Current Saved
Ports Data VLANs are used only
Current Saved Current Saved
Ports Data VLANs are used only
Optics [0 ] [
0
] [0 ] [
0
] [
Y
] if Tags are enabled on both
e Optics and Data Ports.
Data [0 ] [
0
] [0 ] [
0
] [
Y
] th
Management VLAN EXT Mgmt Tag
NMP [0 ] [
0
] [0 ] [
0
] [
N
]
S
Data VLANs <Optics <----> Data>
VLAN 1 [0 ] [
Data VLANs <Optics <----> Data>
VLAN 1 [0 ] [
900
] VLAN 12 [0 ] [
911
] VLAN 23 [0 ] [
922
]
VLAN 2 [0 ] [
901
] VLAN 13 [0 ] [
912
] VLAN 24 [0 ] [
923
]
VLAN 3 [0 ] [
902
] VLAN 14 [0 ] [
913
] VLAN 25 [0 ] [
924
]
VLAN 4 [0 ] [
903
] VLAN 15 [0 ] [
914
] VLAN 26 [0 ] [
925
]
VLAN 5 [0 ] [
904
] VLAN 16 [0 ] [
915
] VLAN 27 [0 ] [
926
]
VLAN 6 [0 ] [
905
] VLAN 17 [0 ] [
916
] VLAN 28 [0 ] [
927
]
VLAN 7 [0 ] [
906
] VLAN 18 [0 ] [
917
] VLAN 29 [0 ] [
928
]
VLAN 8 [0 ] [
907
] VLAN 19 [0 ] [
918
] VLAN 30 [0 ] [
909
]
VLAN 9 [0 ] [
908
] VLAN 20 [0 ] [
919
] VLAN 31 [0 ] [
930
]
VLAN 32 [0 ] [
931
]
VLAN 10 [0 ] [
909
] VLAN 21 [0 ] [
920
]
VLAN 11 [0 ] [
910
] VLAN 22 [0 ] [
921
]
7.
Valid VLAN IDs are between 1 and 4094. Valid priorities are between 0 and
Type S or F3 to save the changes. Type Q or F4 to quit and cancel changes.
Type S or F3 to save the changes. Type Q or F4 to quit and cancel changes.
Saved VLAN Values <Active after reboot>. Current VLAN Values <Active now>.
Tags
VLAN IDs Priorities
Current Saved Current Saved
Current Saved Current Saved
y
Ports Data VLANs are used onl
Optics [0 ] [
Optics [0 ] [
0
] [0 ] [
0
] [
Y
] if Tags are enabled on
both
e Optics and Data Ports.
Data [13 ] [13 ] [0 ] [
0
] [
Y
] th
t
Management VLAN EXT Mgm Tag
SNMP [0 ] [
SNMP [0 ] [
200
] [0 ] [
0
] [
N
]
***WARNING***
If the device is currently managed on any port other than the EXT MGMT
port, do not leave the Management Tag field defined as zero (0). This will
disable management traffic on the iMcV-Giga-FiberLinX-II. You must enter a
VLAN ID between 1 and 4094 (excluding the VLAN IDs used for the Port
VLAN or for the Data VLANs).
port, do not leave the Management Tag field defined as zero (0). This will
disable management traffic on the iMcV-Giga-FiberLinX-II. You must enter a
VLAN ID between 1 and 4094 (excluding the VLAN IDs used for the Port
VLAN or for the Data VLANs).
Unit Configuration—unit
The iMcV-Giga-FiberLinX-II allows you to view unit status as well as configure some
unit features by using a serial connection or a Telnet session. In the Main
unit features by using a serial connection or a Telnet session. In the Main