IMC Networks iMcV-Giga-FiberLinX-II 用户手册

 

51 

The iMcV-Giga-FiberLinX-II features a serial port that uses an IBM-compatible DB-9 
serial connector.  To connect an iMcV-Giga-FiberLinX to your workstation, use a 
straight-through (pin-to-pin) cable.   

If your workstation has a serial port using a connection not compatible with a DB-9 
COM port, use the pin connection chart for reference in making a cable.   

Ensure the cable length is less than 50 ft. (15.24 m).  Plug one end of the cable into 
the DB-9 connector on the iMcV-Giga-FiberLinX and the other into the appropriate 
port on your workstation. 

Set your workstation for VT-100 emulation.  The serial port on the workstation should 
be set for:  

2 Transmit 

(Out) 

3 Transmit 

(In) 

5 Ground 

1, 4, 6-9 

Reserved 

•  38.4K baud 
•   8 data bits 

•   1 stop bit 
•   no parity 

•   no flow control