IMC Networks SNMP 用户手册
13
UMA (Unified Management Agent)
Centralized management makes practical sense for networks of all sizes,
especially service provider networks that must monitor and upgrade large
quantities of devices. The Unified Management Agent (UMA) allows
operators to manage all IMC modules with on-board logic (FiberLinX-II
series) installed in an IMC Networks iMediaChassis series, with a single IP
address from a central location. In addition, UMA allows users to centrally
manage and administer firmware upgrades over multiple devices.
especially service provider networks that must monitor and upgrade large
quantities of devices. The Unified Management Agent (UMA) allows
operators to manage all IMC modules with on-board logic (FiberLinX-II
series) installed in an IMC Networks iMediaChassis series, with a single IP
address from a central location. In addition, UMA allows users to centrally
manage and administer firmware upgrades over multiple devices.
For example, install 20 iMcV-FiberLinX-II devices in a 20 slot iMediaChassis
at the Central Office (CO) then connect each to a remote iMcV-FiberLinX-II
unit installed at the customers premise (CPE); UMA will then allow users to
manage all 41 devices (including the chassis at the CO) via a single IP
address. Users may still assign IP addresses to each iMcV-FiberLinX-II and
manage them independently when the SNMP Management Module within
the iMediaChassis is omitted.
at the Central Office (CO) then connect each to a remote iMcV-FiberLinX-II
unit installed at the customers premise (CPE); UMA will then allow users to
manage all 41 devices (including the chassis at the CO) via a single IP
address. Users may still assign IP addresses to each iMcV-FiberLinX-II and
manage them independently when the SNMP Management Module within
the iMediaChassis is omitted.
With the Unified Management Agent
When an SNMP request for an iMcV-FiberLinX-II comes in, the SNMP
Management Module in the iMediaChassis series passes the request to the
SNMP agent in the specific module. The SNMP agent in the iMcV-
FiberLinX-II provides the relevant management information, which is then
routed via the SNMP Management Module and supplied to the client GUI
(iView², version 1.8 or higher), as well as the serial port and Telnet.
Management Module in the iMediaChassis series passes the request to the
SNMP agent in the specific module. The SNMP agent in the iMcV-
FiberLinX-II provides the relevant management information, which is then
routed via the SNMP Management Module and supplied to the client GUI
(iView², version 1.8 or higher), as well as the serial port and Telnet.