IMC Networks SNMP 用户手册

 

2

 

Each SNMP Management Module features several LEDs.  The LED functions 
are: 

 

 

Glows green when a link is established on port. 
Glows green when data activity occurs. 
 
Blinks amber when port is in Full-Duplex mode.  
Blinks amber when collisions occur; extinguished 
when port is operating in Half-Duplex mode. 
 
Glows yellow when temperature of unit surpasses a 
user-defined Level, configurable through iView².

 

 
Glows amber when one power supply malfunctions. 
 
Refer to specific iMediaChassis series manuals for 
details 

 

 

Once connected to a network, assign the SNMP Management Module IP 
configuration information (e.g., IP address, subnet mask, etc.). There are four 
ways to do this: 
 
ƒ  Using iConfig 
ƒ  Using the Management Module’s serial port 
ƒ  Using DHCP (Dynamic Host Control Protocol); DHCP must be enabled 

through serial configuration or Telnet, via iConfig 

ƒ  Telnet (Default IP=10.10.10.10; subnet mask 255.0.0.0) 
 
In addition to assigning an IP address and subnet mask, the iMediaChassis 
series also allows creation of community strings, assigning access rights, 
configuration of traps and more. iConfig offers more options than configuring 
via the serial port or Telnet.  After assigning the iMediaChassis series an IP 
address, use iView² or another SNMP compatible Network Management 
System (NMS) to remotely configure, monitor and manage the modules 
installed.